Description
STARK as a high-end portable radio, SGS10-D32 is fully developed by Stark based on TI OMAP platform and compliant with ETSI TS 102 361 protocol. Totally customizable functions and features: Vibrate; Voice Recording (1G/2G); GPS (Optional); Bluetooth (Optional); Man Down (Optional). We can offer API for second-development. Stark TI OMAP Series digital portable radios include SGS10-D32 and SGS10-D31 (without screen and keyboard). Dual Modes (Analog + Digital) SGS10-D32 can operate in either analog or digital mode. It is compatible with the prevalent analog system, ensuring a smooth analog-to-digital transition. Versatile Voice Calls SGS10-D32 supports various voice call types, including Private Call, Group Call, All Call and Emergency Call. Text Message SGS10-D32 supports IP Data/Defined Data messages, including Private Message and Group Message. Digital Signaling SGS10-D32 supports various signaling, including Call Alert, Radio Check, Remote Monitor, Radio Disable and Radio Enable. Vibrate This feature is helpful in reminding you of the reception of any Private Call, Call Alert or Text Message under noisy or low-volume conditions. Various Analog Signaling Types SGS10-D32 supports various analog signaling (DTMF, 2-Tone, 5-Tone, QDC-1200 and CDCSS/CTCSS), providing higher function expansion capacity. Scan SGS10-D32 supports scanning of analog voice and signaling, digital voice and data. It can also support mixed modes scanning. IP Multi-site Connect and Roaming SGS10-D32 supports communication with any other terminals as well as smooth Roaming within IP Multi-site Connect System. Advanced Features (Optional) SGS10-D32 supports various optional advanced features including Man Down, GPS and Bluetooth. Privacy of Voice and Data SGS10-D32 supports analog scrambling, and digital encryption using Advanced Encryption Standard (AES) and ARCFOUR (ARC4) encryption algorithm to voice with 256-bit encryption. Upgrade to Tier-III Customer can upgrade SGS10-D32 software to Tier-III without buying new devices. Frequency Range VHF: 136-174MHz UHF: 350-400MHz; 400-470MHz; 450-520MHz Channel Capacity 1024 Zone Capacity 64 (Each with a Maximum of 16 Channels) Channel Spacing 12.5kHz (Digital) 25/20/12.5kHz (Analog) Operating Voltage 7.4V Battery 2000mAh / 3000mAh (Optional) Li-ion Battery Battery Life (5-5-90 Duty Cycle, High TX Power) Analog: Above 11 Hours Digital: Above 15 Hours Frequency Stability ±1.0ppm Antenna Impedance 50Ω Dimensions (H×W×D) 130×55×35mm Weight 333g LCD Display 1.8 TFT Receiver Sensitivity (Analog) 0.22μV (12dB SINAD) / 0.22μV (Typical) (12dB SINAD) Sensitivity (Digital) 0.22μV/BER 5% Selectivity TIA-603 ETSI ≥60dB @ 12.5kHz / 70dB @ 20&25kHz Intermodulation TIA-603 ETSI ≥70dB @ 12.5/20/25kHz S/N 40dB @ 12.5kHz Rated Audio Power Output 1.5W Rated Audio Distortion ≤3% Audio Response +1~-3dB Conducted Spurious Emission <-57dBm Transmitter RF Power Output VHF High Power: 5W UHF High Power: 4W VHF Low Power: 1W UHF Low Power: 1W FM Modulation 11KΦF3E @ 12.5kHz 14KΦF3E @ 20kHz 16KΦF3E @ 25kHz 4FSK Digital Modulation 12.5kHz Data Only: 7K60FXD 12.5kHz Data & Voice: 7K60FXW Conducted/Radiated Emission -36dBm<1GHz / -30dBm>1GHz Modulation Limiting ±2.5kHz @ 12.5kHz ±4kHz @ 20kHz ±5kHz @ 25kHz FM Noise 40dB @ 12.5kHz / 43dB @ 20 kHz / 45dB @25kHz Adjacent Channel Power 60dB @ 12.5kHz 70dB @ 20/25kHz Audio Distortion ≤3% Digital Vocoder Type AMBE3000++ Digital Protocol ETSI-TS102 361-1.-2.-3 Environmental Specifications Operating Temperature -30℃~ +60℃ Storage Temperature -40℃~ +85℃ ESD IEC 61000-4-2 (Level 4) ±8kV (Contact) ±15kV (Air) U.S. Military Standard MIL-STD-810 C/D/E/F/G Dust & Water Intrusion IP67 Standard Humidity Per MIL-STD-810 C/D/E/F/G Standard Shock & Vibration Per MIL-STD-810 C/D/E/F/G Standard All specifications are tested according to applicable standards and subject to changes without notice due to continuous development.
