How you can Program Your Kenwood Two-Way Radio/Walkie talkie To set a specific channel: >Turn the radio off and hold down the menu button. While still holding down the menu button, turn the radio back on and then release the button. >Using the arrow keys, select whichever channel number you prefer. >Once you land on the correct channel, press the menu button again. >Next, use the arrow keys to select your preferred frequency within that channel. >If you want to program multiple frequencies within each channel, repeat those same steps for every channel. >Press any other button to exit. To set your radio to scan for channels: >Turn the radio off and hold down the menu button. While still holding down the menu button, turn the radio back on and then release the button. >Press either one of the arrow buttons repeatedly until “Sc-on” appears on the screen. >Press the menu button again, and then press PTT, Mon or Cal to exit. >Hold down the up arrow button until “Scan” flashes on the screen. Your radio will automatically scan frequencies within its range and connect to those that it finds compatible.